60cfm Refrigerated Air Dryer

40cfm-10bar-refrigerated-air-dryer-manufacturers-and-exporters-in-India.png
Refrigerated-air-dryer-manufacturers-for-moisture-removal-1-600x401.png
Industrial-Refrigerated-air-dryer-manufacturers-1-600x401.png
Refrigerated-air-dryer-manufacturers-and-exporters-1-600x401.png
Moisture-removal-air-dryer-1-600x401.png
Refrigerated-air-dryer-manufacturer-in-India-1-600x401.png

60cfm Refrigerated Air Dryer

Operations: 60cfm Refrigerated Air Dryer Manufacturers

Moisture, either liquid or vapor, is present in compressed air as it exits the compressor system. If this moisture is not properly removed, your compressed air system can lose efficiency and require dramatically increased maintenance, which can result in costly downtime. The majority of pneumatic instruments and processes cannot tolerate hot compressed air, compressors are normally supplied with after-coolers and moisture separators. After-coolers are heat exchangers that utilize either water or ambient air to cool the compressed air. As the water and lubricant vapors within the compressed air cool, a significant amount condenses into a liquid. An after-cooler discharging compressed air at 100F passes 67 gallons of water per 1,000 scfm per 24 hours. To avoid these problems, compressed air systems have purification devices available to remove the water vapor and other contaminants. The proper selection of these devices is critical as pneumatic applications and compressed air systems become increasingly sophisticated.


Operations:

The pneumatic equipment in use and the lowest expected ambient temperature determine the drying method. The most common dryer is a Refrigerated Air Dryers that cools the compressed air, condenses water and oil vapors, separates them, and drains them from the system. The “dried” compressed air is then fed to the air system.

Dryer performance is specified as a pressure dew point class that is based on a specific inlet and ambient conditions. The lowest pressure dew point class with a Refrigerated Air Dryer is Class H. This class delivers a pressure dew point that of 33EF to 39EF. Refrigerated Air Dryers should not operate below the Class H range because the water vapor will freeze in the dryer. The highest practical pressure dew point for a refrigerated dryer is 60EF because higher pressure dew points give condensation in downstream piping.

Refrigerated Air Dryers remove moisture from the compressed air through a mechanical Refrigeration Dryer System to cool the compressed air and condense water and lubricant vapor. Most Refrigerated Air Dryers cool the compressed air to a temperature of approximately 35EF, resulting in a pressure dew point range of 33EF – 39EF. Keep in mind that this range is also the lowest achievable with a refrigerated design since the condensate begins to freeze at 32EF.

  • Made of Supreme Quality With CE Certified
  • Durable Electrical Energy into Mechanical Energy
  • With Electrical Timer Based Auto Drain Valve
  • With Emmerson make made in Germany Compressor


Specification

Weight60 kg
Dimensions60 × 47.5 × 65 cm
TECHNICAL SPECIFICATION FOR 40 CFM REFRIGERATED AIR DRYER SYSTEM
1DESIGN DATA
a) MAX WORKING PRESSURE15.0 Kg/sq.cm
b) DESIGN PRESSURE18 Kg/sq.cm
2END CONNECTION
a) INLET1/2″ Bsp
b) OUTLET1/2″ Bsp
3HEAT EXCHANGER
a. PRE COOLERMAKEMARUTI
MATERIALCopper pipe
TYPETube and Tube
b.EVAPERATORMAKEMARUTI
MATERIALCopper pipe
TYPETube and Tube
4MOISTURE SEPARATORMAKEMARUTI
MATERIALMild steel
TYPECentrifugal
5COMPRESSOR
REFRIGERANT COMPRESSORMAKEEmmerson
TYPEHermatically sealed
POWER220V, 50HZ
6REFRIGERANTR-134A
7CONDENSOR
MAKEMARUTI
TYPEAir cooled
SIZE12X13X2 Row
MATERIALCopper with Aluminium Fins
8FAN MOTOR
MAKEHicool
TYPEPanel fan, 9”fan dia
POWER220V, 50HZ
WATTS10
9FILTER DRIER
MAKEMARUTI
TYPECopper pipe with silica
10EXPANSION VALVE
MAKEMARUTI
MATERIALCopper
TYPECapillary
11TEMPERATURE CONTROLLER
MAKEMultispan Control
MODELCC-5020 / 7510-P
TYPESensor based
12AUTO DRAIN VALVE
MAKEConcept
MODELLow Pressure
TYPETimer based
SIZE1/2″ BSP
13CANOPYMATERIALCR Sheet
14FINISHPowder Coating
COLOURBlack and Green
15DEW POINT
a) PRESSURE DEW POINT+2 Deg
b) ATMOSPHERIC DEW POINT– 22 Deg
16OVERALL DIMENSION
LENGTHMM600
HEIGHTMM660
WIDTHMM475
17WEIGHT (Without packing)KGS50



Features:

  • Maruti Refrigeration Dryers are suitable for all compressed air systems like Condensing Temperature control for ambient Temperature variations.
  • Hot gas by-pass circuit for a partial load.
  • Maintains constant pressure dew point.
  • The advanced mimic display indicates the functions & faults if any.
  • Automatic Drain Valve provided in Demister & Heat exchangers for effective Dryer functioning.

Applications:

  • Refrigeration Dryers are suitable for all compressed air systems like (As per ISO 9001:2008 Low pressure and high-pressure Air Dryer Manufacturer, Air Dryer Manufacturers, Air Dryer Manufacturers in India, Refrigerated Air Dryer manufacturers Ahmedabad)

You may also Like