Reciprocating Air Compressor is a positive displacement air compressor in which air is sucked in a chamber and compressed with the help of a reciprocating piston. It is called as positive displacement compressor because air is first sucked in a chamber and then compression is achieved by decreasing area of the chamber. The area is decreased by a piston which does reciprocating motion.
Working Principle:
The reciprocating compressor is either powered by electric motor, diesel engine drive /petrol engine drive.
In reciprocating air compressor, as the piston moves towards the air is sucked into the cylinder from the atmosphere and when it moves towards, the compression of the air starts and keeps on going and pressure increases. When the pressure increases up to its design limit it pushes the discharge valve to open and the compressed air is delivered to the storage tank.(5hp 500ltr tank Reciprocating compressor manufacturers in India, 5hp 1242 IR type compressor exporters in India, 5hp air compressor manufacturers in India Gujarat Ahmedabad)
LUBRICATED RECIPROCATING AIR COMPRESSOR
With branded Crompton motor & L & T DOL starter., AS PER IS – CI 25 GRADED INDUCTION CASTING & MINIMUM 180 AND MAXIMUM HARDNESS 210, (415+/- 10% V,3 Phase 50Hz+/- 5% AC supply with ambient 50ºC,Class “F” insulation with temperature rise limited to Class “B”)
Make:- Maruti MACF – 1242, 5- HP / 3.73 kw THREE PHASE MOTOR
Type of Compressor:- Reciprocating
No. of Cylinders :- 2, Bore Stroke: 4”& 2.50” / 2.75”
Piston Displacement : CFM 17.32 / LPM-485/ m3/hrs 29.43 m3/min 0.49
Maximum Working Pressure :- 12.3 BAR/ 175 PSI
Electric Condition 3 Ph, 415V, RPM 1440, 50Hz
Air Receiver Capacity: – 500 LTR. Size 24×66inch 4mm shall 5mm disk
L 60” W 30” H 41” AIR COMPRESSOR WEIGHT 219KG APPROX.
WITH WOODEN CRATE WEIGHT 400KG APPROX.
Description:
This 5 hp Two Stage air compressor Specially Designed for Industrial Various Applications, This machine widely used for Pneumatic Valve on off operations and auto mobile industrial workshops.
STANDARD ACCESSORIES:
The unit will be mounted on Air Receiver
Automatic on-off pressure Control Switch, Air Delivery Valve, Pressure gauge, Manual water Tank Drain valve, Belt Guard, Inlet Air Filter & Check Valve in Discharge line, Safety Valve, Fly wheel ( Pulley ), Motor Slide Rails, V – Belts.